期刊


ISSN0038-1586
刊名塑性と加工
参考译名塑性与加工
收藏年代1997～2024



全部

1997 1998 1999 2000 2001 2002
2003 2004 2005 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023 2024

1998, vol.39, no.444 1998, vol.39, no.445 1998, vol.39, no.446 1998, vol.39, no.447 1998, vol.39, no.448 1998, vol.39, no.449
1998, vol.39, no.450 1998, vol.39, no.451 1998, vol.39, no.452 1998, vol.39, no.453 1998, vol.39, no.454 1998, vol.39, no.455

题名作者出版年年卷期
Bore-expand testing of aluminum and copper alloy sheets at high temperaturesM. Sugamata; T. Iwata; J. Kaneko19981998, vol.39, no.446
Coil deformation and flatness change under strip coiling -flatness change of thin strip during coiling process II -S. Yanagi; S. Hattori; Y. Maeda; H. Ibata; Y. Sugimoto; M. Sawada19981998, vol.39, no.446
Edge-drop reduction effect of intermediate roll shift -- technology development for controlling strip edge-drop in a cold tandem mill IA. Aizawa; K. Hara; K. Nakamoto; M. Otsuka; J. Hayakawa; T. Miki19981998, vol.39, no.446
Effect of thermo-mechanical treatment on mechanical properties of 2024Al-3Fe-5Ni P/M alloyK. Matsuki; R. Kitano; M. Tokizawa; T. Aida; T. Yokote; J. Kusui; K. Yokoe19981998, vol.39, no.446
Effect of tool stiffness on the sheet bending processH. Takizawa; A. Makinouchi19981998, vol.39, no.446
Finite-element analysis of metal flow in bearing section during extrusion process of "L", "C" and "T" sections -combination of three-dimensional FE simulation and extrusion die design-2 -M. Kiuchi; J. Yanagimoto; V. Mendoza19981998, vol.39, no.446
Finite-element analysis of metal flow in bearing section during extrusion process of rectangular and angle sections -combination of three-dimensional FE simulation and extrusion die design-1 -Manabu Kiuchi; Jun Yanagimoto; Victor Mendoza19981998, vol.39, no.446
Forming limit and influence of clearance -development of die smooth-necked can IIH. Utsunomiya; H. Nishimura19981998, vol.39, no.446
Influence of temperature on mechanical properties of steel-plastic laminates -formability of steel sheets under chill working condition II-Tetsuro Ohwue; Matsuo Usuda; Takeo Nakagawa19981998, vol.39, no.446
Optimum design of outer tools using the spline rolling simulation model -spline rolling of deep drawn cups III-R. Matsunaga; T. Ozaki; T. Takemasu; R. Kamashita; H. Tsukamoto; A. Tanaka19981998, vol.39, no.446
12



制造业外文文献服务平台