期刊


ISSN1078-9669
刊名HVAC&R research
参考译名国际供暖、通风、空调、制冷研究杂志
收藏年代1999～2014

关联期刊参考译名收藏年代
Science and Technology for the Built Environment建筑环境科学技术2015～2024


全部

1999 2000 2001 2002 2003 2004
2005 2006 2007 2008 2009 2010
2011 2012 2013 2014

2012, vol.18, no.1/2 2012, vol.18, no.3 2012, vol.18, no.4 2012, vol.18, no.5 2012, vol.18, no.6

题名作者出版年年卷期
Thermal environment in indoor spaces with under-floor air distribution systems: Part 2. Determination of design parameters (1522-RP)Guangqing Xue; Kisup Lee; Zheng Jiang; Qingyan Chen20122012, vol.18, no.6
Thermal environment in indoor spaces with under-floor air distribution systems: Part 1. Impact of design parameters (1522-RP)Kisup Lee; Guangqing Xue; Zheng Jiang; Qingyan Chen20122012, vol.18, no.6
A procedure for predicting pressure loss coefficients of duct fittings using computational fluid dynamics (RP-1493)Wei Liu; Zhengwei Long; Qingyan Chen20122012, vol.18, no.6
Optimal coordination of heat pump compressor and fan speeds and subcooling over a wide range of loads and conditionsTea Zakula; Peter Armstrong; Leslie Norford20122012, vol.18, no.6
Individual control of a personalized ventilation system integrated with an ambient mixing ventilation systemYixing Chen; Benny Raphael; S. C. Sekhar20122012, vol.18, no.6
Infiltration as ventilation: Weather-induced dilutionWilliam J. N. Turner; Max H. Sherman; Iain S. Walker20122012, vol.18, no.6
Experimental and theoretical investigation of thermoacoustic prime moverN. M. Hariharan; P. Sivashanmugam; S. Kasthurirengan20122012, vol.18, no.6
A study of pre-cooling impacts on peak demand limiting in commercial buildingsYongjun Sun; Shengwei Wang; Fu Xiao; Gongsheng Huang20122012, vol.18, no.6
Two-phase factional pressure drops in U-bends and contiguous straight tubes for different refrigerants, orientations, tube, and bend diameters: Part 2. New models (RP-1444)Ricardo J. Da Silva Lima; John R. Thome20122012, vol.18, no.6
Two-phase frictional pressure drops in U-bends and contiguous straight tubes for different refrigerants, orientations, tube, and bend diameters: Part 1. Experimental results (RP-1444)Ricardo J. Da Silva Lima; John R. Thome20122012, vol.18, no.6
123456789



制造业外文文献服务平台