期刊


ISSN0954-4054
刊名Proceedings of the Institution of Mechanical Engineers
参考译名机械工程师学会会报B辑：工程制造杂志
收藏年代1995～2024



全部

1995 1996 1997 1998 1999 2000
2001 2002 2003 2004 2005 2006
2007 2008 2009 2010 2011 2012
2013 2014 2015 2016 2017 2018
2019 2020 2021 2022 2023 2024

2013, vol.227, no.1 2013, vol.227, no.10 2013, vol.227, no.11 2013, vol.227, no.12 2013, vol.227, no.2 2013, vol.227, no.3
2013, vol.227, no.4 2013, vol.227, no.5 2013, vol.227, no.6 2013, vol.227, no.7 2013, vol.227, no.8 2013, vol.227, no.9

题名作者出版年年卷期
Modeling and analysis of elongation for submerged arc-welded joints by using developed agglomerated fluxesAjay Kumar; Hari Singh; Sachin Maheshwari20132013, vol.227, no.7
Prediction of springback during indirect hot press forming through tensile test with simultaneous coolingJune S. Hwang; Jung H. Moon; Chung-Gil Kang20132013, vol.227, no.7
A fast optimization approach for multipass wire drawing processes based on the analytical modelGuang-Liang Zhang; Zhang-Wei Wang; Shi-Hong Zhang; Ming Cheng; Hong-Wu Song20132013, vol.227, no.7
Manufacture of microporous ceramic layer by suspension-sedimentation for filtration applicationsTahar Laoui; Faheemuddin Patel; Nouari Saheb; Nasser Al-Aqeeli20132013, vol.227, no.7
Research on a novel linearity amending system for the precise film potentiometerGen Pan; En Guang Guan; Fan Yang; Shi Tao Zhan; Zhuang Fu; Yan Zheng Zhao20132013, vol.227, no.7
Experimental studies on the overall efficiency performance of axial piston motor with a laser surface textured valve plateZhaoqiang Wang; Linyi Gu; Lin Li20132013, vol.227, no.7
A stochastic multiobjective multiconstraint inventory model under inflationary condition and different inspection scenariosAref Gholami-Qadikolaei; Abolfazl Mirzazadeh; Reza Tavakkoli-Moghaddam20132013, vol.227, no.7
A new process capability analysis chart approach on the chip resistor quality managementLiang-Yuh Ouyang; Chang-Hsien Hsu; Chun-Ming Yang20132013, vol.227, no.7
Surface temperature difference for analysis of distortion of heavy weak-rigidity castings during heat treatmentYu Hai-liang; Kang Jin-wu; Lu Cheng; Tieu Kiet20132013, vol.227, no.7
Point of tool change time and monitoring program for microscale milling processJoon-Young Koo; Jeong-Suk Kim; Su-Hoon Jang20132013, vol.227, no.7
12



制造业外文文献服务平台