期刊


ISSN0889-504X
刊名Journal of Turbomachinery
参考译名涡轮机械杂志
收藏年代1995～2024



全部

1995 1996 1997 1998 1999 2000
2001 2002 2003 2004 2005 2006
2007 2008 2009 2010 2011 2012
2013 2014 2015 2016 2017 2018
2019 2020 2021 2022 2023 2024

2013, vol.135, no.1 2013, vol.135, no.2 2013, vol.135, no.3 2013, vol.135, no.4 2013, vol.135, no.5 2013, vol.135, no.6

题名作者出版年年卷期
The Effect of Acoustic Excitation on Boundary Layer Separation of a Highly Loaded LPT BladeChiara Bernardini; Stuart I. Benton; Jeffrey P. Bons20132013, vol.135, no.5
An Experimental Study of Loss Sources in a Fan Operating With Continuous Inlet Stagnation Pressure DistortionEwan J. Gunn; Sarah E. Tooze; Cesare A. Hall; Yann Colin20132013, vol.135, no.5
Experimental Analysis of the Interaction Between Rim Seal and Main Annulus Flow in a Low Pressure Two Stage Axial TurbineSebastian Schrewe; Holger Werschnik; Heinz-Peter Schiffer20132013, vol.135, no.5
Probabilistic Mistuning Assessment Using Nominal and Geometry Based Mistuning MethodsJoseph A. Beck; Jeffrey M. Brown; Joseph C. Slater; Charles J. Cross20132013, vol.135, no.5
The Influence of Tip Clearance Momentum Flux on Stall Inception in a High-Speed Axial CompressorJoshua D. Cameron; Matthew A. Bennington; Mark H. Ross; Scott C. Morris; Juan Du; Feng Lin; Jingyi Chen20132013, vol.135, no.5
Endwall Loss and Mixing Analysis of a High Lift Low Pressure Turbine CascadeM. Eric Lyall; Paul I. King; Rolf Sondergaard20132013, vol.135, no.5
Measurements of Adiabatic Film and Overall Cooling Effectiveness on a Turbine Vane Pressure Side With a TrenchJason E. Albert; David G. Bogard20132013, vol.135, no.5
Experimental Simulation of Contaminant Deposition on a Film-Cooled Turbine Vane Pressure Side With a TrenchJason E. Albert; David G. Bogard20132013, vol.135, no.5
Effects of Winglet Geometry on the Aerodynamic Performance of Tip Leakage Flow in a Turbine CascadeChao Zhou; Howard Hodson; Ian Tibbott; Mark Stokes20132013, vol.135, no.5
Effect of Ingestion on Temperature of Turbine DisksOliver J. Pountney; Carl M. Sangan; Gary D. Lock; J. Michael Owen20132013, vol.135, no.5
123



制造业外文文献服务平台