期刊


ISSN1364-0461
刊名International Journal Cast Metals Research
参考译名国际铸造金属研究杂志
收藏年代1998~2024



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023 2024

2015, vol.28, no.1 2015, vol.28, no.2 2015, vol.28, no.3 2015, vol.28, no.4 2015, vol.28, no.5 2015, vol.28, no.6

题名作者出版年年卷期
Preparation of Al-Cu alloys by aluminothermic reduction of CuO using submerged powder injection assisted with mechanical agitation: thermodynamic approach and kinetic measurementsHernandez Diaz, J. M.; Flores Valdes, A.; Ochoa Palacios, R.20152015, vol.28, no.1
Effect of cooling rate on microstructure and mechanical properties of squeeze cast Al-Cu-Mg alloyGan, Y.; Zhang, D.; Zhang, W.; Li, Y.20152015, vol.28, no.1
Study on hot tearing tendency during continuous casting of steel by overall hot tearing susceptibility (OHTS)Alizadeh, M.20152015, vol.28, no.1
Melting and casting of lithium containing aluminium alloysAkhtar, N.; Akhtar, W.; Wu, S. J.20152015, vol.28, no.1
Influence of riser design on macrosegregation in static castingsZhang, S. L.; Johnson, D. R.; Krane, M. J. M.20152015, vol.28, no.1
Wear properties of squeeze cast in situ Mg2Si-A380 alloyLus, H. Murat; Ozer, G.; Guler, K. Altug; Erzi, E.; Dispinar, D.20152015, vol.28, no.1
Influence of alumina percentage on hot deformation of aluminium-alumina matrix compositeSamiee, A.; Meratian, M.20152015, vol.28, no.1
Effect of Al-5Ti-1B on grain refinement, dendrite coherency and porosity of AZ91E magnesium alloyVlasceanu, M.; Sin, S. Lun; Elsayed, A.; Ravindran, C.20152015, vol.28, no.1
Preparation of Al-Cu alloys by aluminothermic reduction of CuO using submerged powder injection assisted with mechanical agitation: thermodynamic approach and kinetic measurementsHernandez Diaz, J. M.; Flores Valdes, A.; Ochoa Palacios, R.20152015, vol.28, no.1
Effect of cooling rate on microstructure and mechanical properties of squeeze cast Al-Cu-Mg alloyGan, Y.; Zhang, D.; Zhang, W.; Li, Y.20152015, vol.28, no.1
12