期刊


ISSN0268-3768
刊名The International Journal of Advanced Manufacturing Technology
参考译名先进制造技术国际杂志
收藏年代1998～2024



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023 2024

2015, vol.76, no.1/4 2015, vol.76, no.5/8 2015, vol.76, no.9/12 2015, vol.77, no.1/4 2015, vol.77, no.5/8 2015, vol.77, no.9/12
2015, vol.78, no.1/4 2015, vol.78, no.5/8 2015, vol.78, no.9/12 2015, vol.79, no.1/4 2015, vol.79, no.5/8 2015, vol.79, no.9/12
2015, vol.80, no.1/4 2015, vol.80, no.5/8 2015, vol.80, no.9/12 2015, vol.81, no.1/4 2015, vol.81, no.5/8 2015, vol.81, no.9/12

题名作者出版年年卷期
Investigation of machining accuracy of micro-dimples fabricated by modified microscale pattern transfer without photolithography of substratesZhang, Xifang; Li, Hansong; Xu, Zhengyang; Qu, Ningsong20152015, vol.81, no.9/12
Collaborative robot monitoring and control for enhanced sustainabilityWang, Lihui20152015, vol.81, no.9/12
A theoretical analysis and experimental verification of a laser drilling process for a ceramic substrateChen, Ming-Fei; Hsiao, Wen-Tse; Wang, Ming-Cheng; Yang, Kai-Yu; Chen, Ying-Fang20152015, vol.81, no.9/12
3D FEM simulation of helical milling hole process for titanium alloy Ti-6Al-4VJi, Chunhui; Li, Yonghang; Qin, Xuda; Zhao, Qing; Sun, Dan; Jin, Yan20152015, vol.81, no.9/12
Effects of a ball-burnishing process assisted by vibrations in G10380 steel specimensAntonio Travieso-Rodriguez, Jose; Gomez-Gras, Giovanni; Dessein, Gilles; Carrillo, Francisco; Alexis, Joel; Jorba-Peiro, Jordi; Aubazac, Nathalie20152015, vol.81, no.9/12
Improving profitability of optimal mean setting with multiple feature means for dual quality characteristicsDodd, Christopher; Scanlan, James; Marsh, Robert; Wiseall, Steve20152015, vol.81, no.9/12
Performance analysis of non-traditional algorithmic parameters in machining operation (vol 77, pg 443, 2015)Gayatri, R.; Baskar, N.20152015, vol.81, no.9/12
Scheduling unrelated parallel machines with sequence-dependent setup timesZeidi, Javad Rezaeian; MohammadHosseini, Samir20152015, vol.81, no.9/12
Modelling of the ball burnishing process with a high-stiffness toolRandjelovic, Sasa; Tadic, Branko; Todorovic, Petar M.; Vukelic, Djordje; Miloradovic, Danijela; Radenkovic, Milan; Tsiafis, Christos20152015, vol.81, no.9/12
On flowshop scheduling problems with the aging effect and resource allocation (vol 62, pg 135, 2012)Rudek, Radosaw; Wielgus, Agnieszka20152015, vol.81, no.9/12
123456



制造业外文文献服务平台