期刊


ISSN0025-5300
刊名Materialpruefung
参考译名材料检验
收藏年代1998～2024



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023 2024

2017, vol.59, no.1 2017, vol.59, no.10 2017, vol.59, no.11/12 2017, vol.59, no.2 2017, vol.59, no.3 2017, vol.59, no.4
2017, vol.59, no.5 2017, vol.59, no.6 2017, vol.59, no.7/8 2017, vol.59, no.9

题名作者出版年年卷期
Uncertainty of strain release coefficients for the blind-hole procedure evaluated by Monte Carlo simulationQiang, Bin; Li, Yadong; Gu, Ying; Boko-haya, Dossa Didier20172017, vol.59, no.7/8
Influence of welding conditions on crack opening displacements in welded CT specimensJiang, Wei; Jiang, Xianfeng; Huang, Yulong20172017, vol.59, no.7/8
Microstructure characterization and corrosion testing of MAG pulsed duplex stainless steel weldsMitelea, Ion; Utu, Ion Dragos; Urlan, Sorin Dumitru; Karancsi, Olimpiu20172017, vol.59, no.7/8
Conventional sintering behavior of matrix materials used for diamond beadsKahraman, Yusuf; Bulut, Berrak; Kayali, Eyup Sabri20172017, vol.59, no.7/8
Micro-CT defect analysis and hardness distribution of flat-face extruded EN AW6060 aluminum chipsGoerlich, Philipp; Scholz, Ronja; Walther, Frank20172017, vol.59, no.7/8
Confirmation of tensile residual stress reduction in electron beam welding using low transformation temperature materials (LTT) as localized metallurgical injections - Part 2: Residual stress measurementGach, Stefan; Olschok, Simon; Francis, John Anthony; Reisgen, Uwe20172017, vol.59, no.7/8
Distribution functions for the linear region of the S-N curveMueller, Christian; Waechter, Michael; Masendorf, Rainer; Esderts, Alfons20172017, vol.59, no.7/8
Improvement of the sacrificial behavior of zinc in scratches of zinc-rich polymer coatings by incorporating clay nanosheetsShirehjini, Farhad Tohidi; Danaee, Iman; Eskandari, Hadi; Nikmanesh, Soudabeh; Zarei, Davood20172017, vol.59, no.7/8
Influence of geometric design variables on the efficiency of the high energy horizontal chromite type ball milling processDokme, Fatih; Guven, Onur; Kulekci, Mustafa Kemal; Esme, Ugur; Ocalir, Seref20172017, vol.59, no.7/8
Preparation and mechanical properties of nano-quartz fiber filled PMMA compositesLuo, Qiu-Yun; Wang, Ping; Ding, Neng-Weng; Peng, Hu; Xie, Liang; Kuang, Meng20172017, vol.59, no.7/8
12



制造业外文文献服务平台