期刊


ISSN0954-4062
刊名Proceedings of the Institution of Mechanical Engineers
参考译名机械工程师学会会报C辑:机械工程学杂志
收藏年代1995~2024



全部

1995 1996 1997 1998 1999 2000
2001 2002 2003 2004 2005 2006
2007 2008 2009 2010 2011 2012
2013 2014 2015 2016 2017 2018
2019 2020 2021 2022 2023 2024

2018, vol.232, no.1 2018, vol.232, no.10 2018, vol.232, no.11 2018, vol.232, no.12 2018, vol.232, no.13 2018, vol.232, no.14
2018, vol.232, no.15 2018, vol.232, no.16 2018, vol.232, no.17 2018, vol.232, no.18 2018, vol.232, no.19 2018, vol.232, no.2
2018, vol.232, no.20 2018, vol.232, no.21 2018, vol.232, no.22 2018, vol.232, no.23 2018, vol.232, no.24 2018, vol.232, no.3
2018, vol.232, no.4 2018, vol.232, no.5 2018, vol.232, no.6 2018, vol.232, no.7 2018, vol.232, no.8 2018, vol.232, no.9

题名作者出版年年卷期
Computerized simulation of tooth contact for planar internal gear enveloping crown worm drive with errorsLuo, Wenjun; Chen, Yonghong; Chen, Yan; Zhang, Guanghui20182018, vol.232, no.9
Effect of textured surface on the frictional noise under line contact and sliding-rolling conditionsLi, Zhi; Chen, Jian; Li, Jiazhu; Liu, Kun20182018, vol.232, no.9
A special feature of employment of Lagrange's equations to the scleronomic mechanical systemsZanevskyy, Ihor; Zanevska, Lyudmyla20182018, vol.232, no.9
Designing the main controller of auxiliary braking systems for heavy-duty vehicles in nonemergency braking conditionsZheng, Hongpeng; Lei, Yulong; Song, Pengxiang20182018, vol.232, no.9
Pseudo-rigid-body dynamic modeling and analysis of compliant mechanismsYu, Yue-Qing; Li, Qian; Xu, Qi-Ping20182018, vol.232, no.9
Fault features analysis of a compound planetary gear set with damaged planet gearsLi, Guoyan; Li, Fangyi; Liu, Haohua; Dong, Dehao20182018, vol.232, no.9
Simulation of capacitive pressure sensor based on microelectromechanical systems technologyBaghelani, Masoud; Hosseini-Sianaki, Ahmad; Behzadi, Zeinab; Lavasani, Arash Mirabdolah20182018, vol.232, no.9
On the mechanical properties of functionally graded materials reinforced by carbon nanotubesRouhi, Saeed; Alavi, Seyed H.20182018, vol.232, no.9
Study on the machining process of micro V-shaped groove by using a revolving tipXue, Bo; Yan, Yongda; Ma, Gaojie; Hu, Zhenjiang20182018, vol.232, no.9
Rapid analysis of low-amplitude sinusoidal roughness in rolling-sliding elastohydrodynamic contacts including thermal effectsHooke, C. J.; Morales-Espejel, G. E.20182018, vol.232, no.9
12