期刊


ISSN0954-4089
刊名Proceedings of the Institution of Mechanical Engineers
参考译名机械工程师学会会报E辑：加工机械工程杂志
收藏年代1995～2024



全部

1995 1996 1997 1998 1999 2000
2001 2002 2003 2004 2005 2006
2007 2008 2009 2010 2011 2012
2013 2014 2015 2016 2017 2018
2019 2020 2021 2022 2023 2024

2018, vol.232, no.1 2018, vol.232, no.2 2018, vol.232, no.3 2018, vol.232, no.4 2018, vol.232, no.5 2018, vol.232, no.6

题名作者出版年年卷期
Ductilizing of cast hypereutectic Al-17%Si alloy by friction stir processingSaini, Nitin; Pandey, Chandan; Dwivedi, Dheerendra Kumar20182018, vol.232, no.6
Influence of sheet thickness on mechanical clinch-compress joining technologyChen, Chao; Han, Xiaolan; Zhao, Shengdun; Xu, Fan; Zhao, Xuzhe; Ishida, Tohru20182018, vol.232, no.6
Effect of flow-forming parameters on surface quality, geometrical precision and mechanical properties of titanium tubeEbrahimi, Mahmoud; Tabei, Kamal Hamed; Naseri, Reza; Djavanroodi, Faramarz20182018, vol.232, no.6
To study the effect of stress magnitude and tool geometry on the calibration coefficients: Ring core techniqueGiri, Anoj; Pandey, Chandan; Mahapatra, Manas M.20182018, vol.232, no.6
Scheduling method of robotic cells with machine-robot process and time window constraintsZhou, Bing-hai; Li, Ming20182018, vol.232, no.6
A methodology for flexibility analysis of process pipingKhan, Kamran A.; Zahid, Umer; Khan, Sohaib Z.; Khan, Muhammad A.; Bukhari, Hassan J.; Ahmed, Imran20182018, vol.232, no.6
A sequential feature extraction method based on discrete wavelet transform, phase space reconstruction, and singular value decomposition and an improved extreme learning machine for rolling bearing fault diagnosisLi, D. Z.; Zheng, X.; Xie, Q. W.; Jin, Q. B.20182018, vol.232, no.6
Development of a transient gas dynamic model for the simulation of pulsation in reciprocating compressor piping systemsZhan, Liu; Duan, Zhenya20182018, vol.232, no.6
Experimental investigations and statistical modeling of surface roughness during ultrasonic-assisted turning with self-lubricating cutting insertsSharma, Varun; Pandey, Pulak M.20182018, vol.232, no.6
High-pressure jet-assisted turning of AISI 304: Experimental and multi-objective optimization approachMirmohammadsadeghi, Sayed E.; Amirabadi, H.20182018, vol.232, no.6
123456



制造业外文文献服务平台