期刊


ISSN0268-3768
刊名The International Journal of Advanced Manufacturing Technology
参考译名先进制造技术国际杂志
收藏年代1998～2024



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023 2024

2020, vol.106, no.1/2 2020, vol.106, no.11/12 2020, vol.106, no.3/4 2020, vol.106, no.5/6 2020, vol.106, no.7/8 2020, vol.106, no.9/10
2020, vol.107, no.1/2 2020, vol.107, no.11/12 2020, vol.107, no.3/4 2020, vol.107, no.5/6 2020, vol.107, no.7/8 2020, vol.107, no.9/10
2020, vol.108, no.1/2 2020, vol.108, no.11/12 2020, vol.108, no.3 2020, vol.108, no.4 2020, vol.108, no.5/6 2020, vol.108, no.7/8
2020, vol.108, no.9/10 2020, vol.109, no.1/2 2020, vol.109, no.3/4 2020, vol.109, no.5/6 2020, vol.109, no.7/8 2020, vol.109, no.9/12
2020, vol.110, no.1/2 2020, vol.110, no.11/12 2020, vol.110, no.3/4 2020, vol.110, no.5/6 2020, vol.110, no.7/8 2020, vol.110, no.9/10
2020, vol.111, no.1/2 2020, vol.111, no.11/12 2020, vol.111, no.3/4 2020, vol.111, no.5/6 2020, vol.111, no.7/8 2020, vol.111, no.9/10

题名作者出版年年卷期
Microstructural and mechanical properties of Ti-Mo alloys designed by the cluster plus glue atom model for biomedical applicationMoshokoa, Nthabiseng; Raganya, Lerato; Obadele, Babatunde Abiodun; Machaka, Ronald; Makhatha, Mamookho Elizabeth20202020, vol.111, no.5/6
Improving deposition quality at higher rates in material extrusion additive manufacturingPapazetis, George; Vosniakos, George-Christopher20202020, vol.111, no.5/6
Development of an intelligent grinding system for fabricating aspheric glass lensesHuang, Chien-Yao; Kuo, Ching-Hsiang; Yu, Zong-Ru; Ho, Cheng-Fang; Wang, Chung-Ying; Hsu, Wei-Yao; Chen, Fong-Zhi20202020, vol.111, no.5/6
Constant speed lines-curves-NURBS reference pulse IPOs (part I)Huypens, Valere20202020, vol.111, no.5/6
Experimental and numerical investigation of deformation characteristics during tube spinning (vol 110, pg 1851, 2020)Roy, Biplov Kumar; Korkolis, Yannis P.; Arai, Yoshio; Araki, Wakako; Iijima, Takafumi; Kouyama, Jin20202020, vol.111, no.5/6
A self-adaptive auxiliary fixture for deformation control in blade machiningHao, Qinglong; Yang, Qian20202020, vol.111, no.5/6
Sustainable material manufacturing from hazardous bauxite red mud in composites with clay slate waste and lime production wasteMymrin, Vsevolod; Aibuldinov, Elaman K.; Alekseev, Kirill; Avanci, Monica A.; Rolim, Paulo H. B.; Catai, Rodrigo E.; Carvalho, Karina Q.20202020, vol.111, no.5/6
A new method for choosing between ball-end cutter and toroidal cutter when machining free-form surfacesHerraz, Mahfoud; Redonnet, Jean-Max; Mongeau, Marcel; Sbihi, Mohammed20202020, vol.111, no.5/6
Burr formation and surface roughness characteristics in micro-milling of microchannelsChen, Liang; Deng, Daxiang; Pi, Guang; Huang, Xiang; Zhou, Wei20202020, vol.111, no.5/6
An integrated homogenization-based topology optimization via RBF mapping strategies for additively manufactured FGLS and its application to bandgap structuresSimsek, Ugur; Gayir, Cemal Efe; Kiziltas, Gullu; Sendur, Polat20202020, vol.111, no.5/6
12345



制造业外文文献服务平台