期刊


ISSN0268-3768
刊名The International Journal of Advanced Manufacturing Technology
参考译名先进制造技术国际杂志
收藏年代1998～2024



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023 2024

2023, vol.124, no.1/2 2023, vol.124, no.10 2023, vol.124, no.11/12 2023, vol.124, no.3/4 2023, vol.124, no.5/6 2023, vol.124, no.7/8
2023, vol.124, no.9 2023, vol.125, no.1/2 2023, vol.125, no.11/12 2023, vol.125, no.3/4 2023, vol.125, no.5/6 2023, vol.125, no.7/8
2023, vol.125, no.9/10 2023, vol.126, no.1/2 2023, vol.126, no.11/12 2023, vol.126, no.3/4 2023, vol.126, no.5/6 2023, vol.126, no.7/8
2023, vol.126, no.9/10 2023, vol.127, no.1/2 2023, vol.127, no.11/12 2023, vol.127, no.3/4 2023, vol.127, no.5/6 2023, vol.127, no.7/8
2023, vol.127, no.9/10 2023, vol.128, no.1/2 2023, vol.128, no.11/12 2023, vol.128, no.3/4 2023, vol.128, no.5/6 2023, vol.128, no.7/8
2023, vol.128, no.9/10 2023, vol.129, no.1/2 2023, vol.129, no.11/12 2023, vol.129, no.3/4 2023, vol.129, no.5/6 2023, vol.129, no.7/8
2023, vol.129, no.9/10

题名作者出版年年卷期
Use of bidirectional electrolyte flow to improve PECM uniformityZhang Zexi; De Meter Edward; Basu Saurabh20232023, vol.127, no.5/6
Influence of sawdust ash on the microstructural and physicomechanical properties of stir-cast Al6063/SDA matrix compositeAdeleke Adekunle A.; Ikubanni Peter P.; Odusote Jamiu K.; Olujimi Boluwatife B.; Okolie Jude A.20232023, vol.127, no.5/6
Optimization of hybrid friction stir welding of PMMA: 3D-printed parts and conventional sheets welding efficiency in single- and two-axis welding tracesPetousis Markos; Mountakis Nikolaos; Vidakis Nectarios20232023, vol.127, no.5/6
Study on the manufacturing process for enhancing the high-pressure capability of stainless steel common railsCao Minye; Hu Chengliang; Zhuang Xiaowei; Zhao Zhen20232023, vol.127, no.5/6
Metal matrix composite fabricated from electrospun PAN, EGNS/PAN nanofibers and AL 5049 alloy by using friction stir processingAbdelhady Saleh S.; Elbadawi Rehab E.; Zoalfakar Said H.20232023, vol.127, no.5/6
Research on the improvement of flat-clinching jointed aluminum alloy by reshaping processOuyang Xiao; Zhang Huiyang; Chen Chao; Duan Liuxi20232023, vol.127, no.5/6
Real-time compensation strategy for clamping force-induced error in face milling of mass-produced valve bodiesGe Guangyan; Xiao Yukun; Du Zhengchun20232023, vol.127, no.5/6
FEM-DEM coupling analysis on hexagonal convex ring 6063-T5 tube ultrasonic-assisted granular medium formingCao Miaoyan; Song Pengfei; Fu Min; Hu Han20232023, vol.127, no.5/6
Manufacturing and optimization of the mechanical properties (tensile strength, flexural strength, and impact energy) of a chicken feather/egg shell/kaolin hybrid reinforced epoxy composite using the Taguchi techniqueYawas Danjuma Saleh; Sumaila Malachy; Sarki Jacob; Samuel Bassey Okon20232023, vol.127, no.5/6
Correction to: Manufacturing and optimization of the mechanical properties (tensile strength, flexural strength, and impact energy) of a chicken feather/egg shell/kaolin hybrid reinforced epoxy composite using the Taguchi techniqueYawas Danjuma Saleh; Sumaila Malachy; Sarki Jacob; Samuel Bassey Okon20232023, vol.127, no.5/6
1234567



制造业外文文献服务平台