期刊


ISSN0043-2288
刊名Welding in the World
参考译名世界焊接
收藏年代1999～2023



全部

1999 2000 2001 2002 2003 2004
2005 2006 2007 2008 2009 2010
2011 2012 2013 2014 2015 2016
2017 2018 2019 2020 2021 2022
2023

2017, vol.61, no.1 2017, vol.61, no.2 2017, vol.61, no.3 2017, vol.61, no.4 2017, vol.61, no.5 2017, vol.61, no.6
2017, vol.61, no.4

题名作者出版年年卷期
Behaviour and influence of slag islands in ferritic stainless steel weldsAnttila, S.; Aula, M.; Porter, D. A.20172017, vol.61, no.6
Mechanisms of weld pool flow and slag formation location in cold metal transfer (CMT) gas metal arc welding (GMAW) (vol 61, pg 1275, 2017)Ahsan, Md. R. U.; Cheepu, Muralimohan; Ashiri, Rouholah; Kim, Tae-Hoon; Jeong, Chanyoung; Park, Yeong-Do20172017, vol.61, no.6
Influence of aluminum surface pre-treatments on the bonding mechanisms and mechanical performance of metal-composite single-lap jointsGoushegir, S. M.; dos Santos, J. F.; Amancio-Filho, S. T.20172017, vol.61, no.6
Influence of Ti on the toughness of the FGHAZ and the CGHAZ of high-strength microalloyed S700MC steelsSpachinger, Stefan Johannes; Ernst, Wolfgang; Enzinger, Norbert20172017, vol.61, no.6
Effect of nitrogen in shielding gas of keyhole GTAW on properties of duplex and superduplex weldsSales, A. M.; Westin, E. M.; Jarvis, B. L.20172017, vol.61, no.6
Investigations of material hardness and structural changes in the heat-affected zone during plasma cuttingLazarevic, Andjela; Lazarevic, Dragoljub20172017, vol.61, no.6
Optimization of welding loads with narrow groove and application of modified spray arc processSchroepfer, Dirk; Kromm, Arne; Kannengiesser, Thomas20172017, vol.61, no.6
Residual stresses of LTT welds in large-scale componentsKromm, Arne; Boin, Mirko; Wimpory, Robert C.; Kannengiesser, Thomas; Gibmeier, Jens; Schroepfer, Dirk; Dixneit, Jonny20172017, vol.61, no.6
Effect of interpass temperature on the microstructure and mechanical properties of multi-pass weld metal in a 550-MPa-grade offshore engineering steelWang, X. L.; Tsai, Y. T.; Yang, J. R.; Wang, Z. Q.; Li, X. C.; Shang, C. J.; Misra, R. D. K.20172017, vol.61, no.6
Model-based description of arc length as a synergetic system parameter in pulsed GMAWReisgen, Uwe; Mann, Samuel; Lozano, Philipp; Buchholz, Guido; Willms, Konrad; Jaeschke, Birger20172017, vol.61, no.6
123



制造业外文文献服务平台